Description
| Hardware | |
|---|---|
| Management interface | Ethernet In-Band |
| Networking interface | (12) GbE RJ45 ports (12) 2.5 GbE RJ45 ports (2) 10G SFP ports |
| PoE interface | (24) PoE/PoE (Pins 1, 2 ; 3, 6-) |
| Total non-blocking throughput | 62 Gbps |
| Switching capacity | 124 Gbps |
| Forwarding rate | 92.25 Mpps |
| Power method | (1) Universal input, 100—240V AC, 8.5A Max., 50/60 Hz (1) USP-RPS DC input: 52V DC, 7.7A; 11.5V DC, 8.7A |
| Power supply | AC/DC, internal, 550W |
| Supported voltage range | 100—240V AC |
| Max. power consumption | 550W |
| Total available PoE | 400W |
| Max. PoE wattage per port by PSE | 34.2W |
| Voltage range PoE mode | PoE: 44— 57V PoE : 50—57V |
| Services | SMB Layer 3 PoE GbE switch |
| ESD/EMP protection | Air: ± 16kV, contact: ± 12kV |
| LCM display | (1) 1.3" color touchscreen |
| Button | Factory reset |
| Ambient operating temperature | -5 to 40° C (23 to 104° F) |
| Ambient operating humidity | 10 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs |
| LEDs | |
| System | Status |
| Ethernet | Link/activity |
| SFP | Link/activity |
| Application Requirements | |
| UniFi Network | Version 5.14.12 and later |
